Set: Adhesive Wrapping Foil Carbon Foil 75x100cm Carbon-Look 3D + Heat protection foil self adhesive for Heat shield 50x50cm

Scope of delivery: Adhesive Wrapping Foil Carbon Foil 75x100cm Carbon-Look 3D + Heat protection foil self adhesive for Heat shield 50x50cm

Adhesive Wrapping Foil Carbon Foil 75x100cm Carbon-Look 3D:

• Wrapping adhesive foil
• Made of PVC Material
• For individual design
• Shape, cut, peel and stick
• With 3D structured surface
• Adaptation to curved shapes
• No voltage after cooling down
• Removable without any damage
• UV-resistant and carwash resistant
• Protection against scratches and stone chips
• Can be stretched (up to 30°C) by applying heat
• Insensitive to cold or heat (about -40°C- +100°C)
• Thickness: 0.14-0.16 mm
• Dimensions (LxW): 100 x 75 cm
• Important: This is not tailored material. Cutting and processing is done by customers.

Heat protection foil self adhesive for Heat shield 50x50cm:

• Heat protection foil for universal use on the motorcycle
• Perfect protection of fairing parts or motorcycle luggage against heat from the manifold or exhaust
• Reliably prevents deformation and damage to panniers and saddlebags caused by heat
• Can be easily and quickly attached to materials of all kinds thanks to its self-adhesive back
• Glass-fibre reinforced aluminium foil enables a reflection of up to 95% of radiant heat
• Aluminium coating enables use under constant load at temperatures up to 650°C and short load peaks up to 1000°C
• Universally and flexibly applicable due to individual cutting by customers
• Dimensions: 50 x 50 cm

• Before applying the film, the surface to be covered must be thoroughly cleaned and degreased. A minimum distance of at least 2cm must be maintained for motorcycle luggage cases or textile saddlebags that are to be insulated against the heat source (e.g. exhaust pipe) over a large area with the heat protection film.