2x 2 pieces LED indicators KP8 with E-mark front-rear tinted + 12V indicator relay

Set consisting of 2x 2 pieces LED indicators KP8 with E-mark, front-rear, tinted and 12V indicator relay

Important: This is a universal article, not adapted to a specific model. In many cases, individual adjustments are required for installation. Please check the dimensions and pictures to see if installation is possible for the corresponding motorcycle.

2x Lumitecs LED motorcycle indicators pair suitable for front and rear
The indicators are integrated almost invisibly into the motorcycle and ensure a clean look
No loss of safety thanks to the latest LED technology - faster reaction time and strong luminosity even during the day
Depending on the model, a frequency transmitter or relay must be connected to ensure the correct flashing frequency (not included)
Suitable for all motorcycles with 12V on-board electrics
E-approval as indicators for front and rear for legal use in road traffic
Scope of delivery: LED indicators for right and left side (2 piece)
Dimensions: length 32.5mm (with screw 46mm), depth 18.5mm, height 13mm, M8 thread

Important: This is a universal article, not adapted to a specific model. In many cases, individual adjustments are required for installation. Please use the dimensions and pictures to check whether installation is possible for the corresponding motorcycle.

Lumitecs 12V LED indicator relay 3 V-pin
Load-independent relay for constant indicator timing
Eliminates the problem of rapid flashing of the direction indicators after converting to LED indicators
Caution: This article is an electronic component. Knowledge of electronics is required for installation. The polarity direction must not be reversed under any circumstances. If you have no knowledge of electronics, please contact the nearest specialist workshop for installation