Set Fairing Crash bar upper part XL compatible with Yamaha Tenere 700 19-24 Motoguard with 2x LED, Engine Guard and headlights

Set consisting of fairing protection bar with 2x LED, crash bar and headlight grille
Scope of delivery: fairing protection bar (right and left side), mounting material, 2x LED additional headlights, 2x mounting kit for crash bar 25-27mm, wiring harness with switch, protective grille, crash bar, headlight grille for front headlights

Attention: Not suitable for the models "World Raid" and "Extreme"

Fairing crash bar to protect the upper part of the motorcycle
Perfect protection for parts further up such as fairing, tank or attachments
Can be mounted alone or optimally combined with the Motoguard crash bar for the engine
Made from extremely stable steel tube with a diameter of 28mm and 22mm
Mounting points of the protection bars are selected so that the impact energy is optimally distributed and high localized loads can be avoided
Optimally adapted to the motorcycle, perfect fall protection without disturbing the appearance
Bent on the latest CNC bending machines for an absolute precision fit
Double powder coating for optimal rust protection: First layer with zinc primer, second layer black for a flawless surface
Important: This is a universal article, not adapted to a specific model. In many cases, individual adjustments are necessary for installation. Please use the dimensions and pictures to check whether installation is possible for the corresponding motorcycle. Installation requires knowledge of motorcycle electrics, if in doubt have it installed by a specialist workshop.
Set consisting of LED fog light with bracket for crash bars 25-27mm, wiring harness and protective grille
Daylight-bright illumination in the dark thanks to the latest LED technology
Increased safety even during the day thanks to better visibility for other road users
Extra wide beam of light for the best illumination even at the side of the road
High-performance LED chip for a long service life with constant performance
Aluminum housing for perfect protection of the lighting technology
Lamp grille to protect the lens from stone chips
100% waterproof and dustproof in accordance with IP67 standard thanks to sealed housing
Bracket for mounting on crash bars or other tubes between 25mm-27mm diameter
Diameter 57mm, depth 105mm
Input voltage 9-30 volts, 18 watts, light output 4,000 lumens, light color 6,000 K
E-approval as fog light
Important: Only suitable with standard engine protection, not suitable when fitting Yamaha Rally engine protection or parts from other manufacturers
Please note:The engine crash bars cannot be installed in conjunction with the OEM front spoiler/underbody protection of the Tenere 700 Rally and Tenere 700 World Raid due to lack of space. These must be permanently dismantled for installation.
Motorcycle engine crash bars as optimal protection for the driver and machine in the event of falls and accidents
Reliably prevent or reduce damage to the engine and can prevent expensive repairs
Protection also for parts located higher up such as the fairing, tank or attachments, as the engine protection bars reduce the inclination to the ground in the event of a fall
Made from extremely stable steel tube with a diameter of 28mm
Mounting points of the protection bars are selected so that the impact energy is optimally distributed and high loads are avoided at specific points
Leaning freedom is fully maintained
Optimally adapted to the motorcycle, perfect fall protection without disturbing the appearance
Bent on the most modern CNC bending machines for an absolute perfect fit
Double powder coating for optimal rust protection: first layer with zinc primer, second Black layer for a flawless surface
Supplied ready to install for right and left side, mounting material included
The following items are available separately:
Crash bar top Art. 207917/Crash bar set top-bottom 207929/Engine protection 245444/Main stand 204640
Crash bars/crash pads do not require registration
Motoguard motorcycle headlight grille for front headlights
Lamp protection grille protects the headlight from stone chips and damage
Gives the headlight a completely new look with little effort
Practically does not affect the light output thanks to very thin struts
Ideal for use in rough terrain or off-road driving
Without ABE